100 Watt

Universal Input For Medical

Medical AC-DC power supplies for medical applications

Our 100 watt universal input AC-DC converter for medical applications features active power factor correction, a built-in EMI Class A filter and a low leakage current. This model also has an open frame package of 2.00" x 3.00" x 1.16" and meets the following medical safety approvals: UL, CE, ES60601-1, EN60601-1 and ANSI/AAMI.

INPUT

Voltage Range
- AC Input: 85 - 264 VAC
- DC Input: 120 - 370 VDC
Input Frequency
- AC Input: 47 - 63 Hz
Input Current
- 115 VAC and Full Load: 1.15 A
- 230 VAC and Full Load: 0.55 A
No Load Input Power
- 230 VAC: 0.3 Watts
Leakage Current
264 VAC: 75µA
Power Factor: 0.95
Start up time: 1000 ms
Rise time: 20 ms
Hold up time
- 115 VAC and Full Load: 16 ms
Input inrush current
- 230 VAC: 60 A
Input protection
Internal fuse inline and neutral: T3,15A/250 VAC

OUTPUT

Output Power
- Open frame: 100 Watts
Initial set voltage accuracy
- 230 VAC and full Load: ±1.0%
Line Regulation
- Low Line to High Line at Full Load: ±0.2%
Load Regulation
- No Load to Full Load: ±0.5%
- 10 - 90% Load: ±0.4%
Voltage Adjustability: ±10%
Minimum Load: 0%
Ripple and Noise (Measured by 20 MHz band width)
- With a 10µF/25V 1206 X7R MLCC
  - 12 Vout: 120 mVp-p
- With a 10µF/25V 1206 X7R MLCC
  - 15 Vout: 150 mVp-p
- With a 1µF/50V 1206 X7R MLCC
  - 24 Vout: 160 mVp-p
- With a 1µF/50V 1206 X7R MLCC
  - 28 Vout: 180 mVp-p
- With a 1µF/50V 1206 X7R MLCC
  - 36 Vout: 190 mVp-p
- With a 0.1µF/100V 1206 X7R MLCC
  - 48 Vout: 340 mVp-p
Temperature Coefficient: ±0.2%°C
Transient Response
- Load step from 50 - 75% change at 2.5A/µs
  - Peak deviation: 3% Vout
  - Recovery time: 500µs
Over Voltage Protection
- Percentage of Vout (nom), Latch mode: 135%
Over Load Protection
- Percentage of lout rated, hiccup mode: 150%
  - 12 Vout, 15 Vout
Short Circuit Protection: continuous, automatic recovery

GENERAL

Efficiency: 91 - 92%
Isolation Voltage 1 minute (2MOPP insulation)
- Input to Output: 4000 VAC
- Input (Output) to F.G: 1500 VAC
Isolation Resistance
- 500 Vdc: 0.1GΩ
Switching Frequency: 60 kHz
Approvals and Standard: ANSI/AAMI, ES60601-1, IEC6060-1 and EN60601-1
Weight
- MUIO: 156 g (5.50 oz)
- MUIT: 194 g (6.84 oz)
- MUI: 210 g (7.41 oz)
- MUID: 232 g (8.18 oz)
MTBF
- MIL-HDBK-217F Ta25°C, Full load: 7.903 x 10^5 hrs
ENVIRONMENTAL
- Operating Ambient Temperature: -25 - 80°C with derating
- Storage Temperature Range: -40 - 85°C
- Operating Altitude: 5000 m
- Thermal Shock: MIL-STD-810F
- Shock: IEC68-2-27
- Vibration: IEC68-2-6
- Relative Humidity
  - Non-condensing: 5 - 95% RH

EMC CHARACTERISTICS

EMI
- EN55011, EN55022 and FCC Part 18: Class A, Class B
Harmonic Currents
- EN61000-3-2, Full Load: Class A and D
Voltage Flicker: EN61000-3-3
ESD
- EN61000-4-2, Perf. Criteria A
  - Air ±8KV
  - Contact ±6KV
Radiated Immunity
- EN61000-4-3: 20 V/m, Perf. Criteria A
Fast Transient
- EN61000-4-4: ±2KV, Perf. Criteria A
Surge
- EN61000-4-5, Perf. Criteria A
  - DM ±1KV
  - CM ±2KV
Conducted Immunity
- EN61000-4-6: 20 Vrms, Perf. Criteria A
Dip and Interruptions
- EN60601-1-2
  - 230 VAC 50 Hz
    - 30%: 500 mS, Perf. Criteria A
    - 60%: 100 mS, Perf. Criteria A
    - >95%: 10 mS, Perf. Criteria A
    - >95%: 5000 mS, Perf. Criteria B
  - 100 VAC 50 Hz
    - 30%: 500 mS, Perf. Criteria A
    - 60%: 100 mS, Perf. Criteria B
    - >95%: 10 mS, Perf. Criteria A
    - >95%: 5000 mS, Perf. Criteria B

Input Range (Vac)	Output Voltage(Vdc)	Output Current @ Natural Convection 50ºC Ta (A)	Input Power @ No Load (W)	Efficiency (%)	Model Number*
85-264	12	8.34	0.3	91	MUI100-12SB
	15	6.67	0.3	92	MUI100-15SB
	24	4.17	0.3	92	MUI100-24SB
	28	3.58	0.3	92	MUI100-28SB
	36	2.78	0.3	91	MUI100-36SB
	48	2.09	0.3	91	MUI100-48SB

Download Data Sheet | Get A Quote Now