60 Watt
Single and Dual Output
Regulated Wide Input, 2:1 and 4:1
Internal pi filter with a low profile package
Our 60 watt single and dual output DC-DC converter features a low profile package of 3.94" x 2.76" x 0.75", inhibit and sync input and six-sided shielding. This design also has over-voltage protection and 85% efficiency.
INPUT
- Voltage Range
- Single Output Voltage
- 12 Vdc: 9 - 18 Vdc
- 24 Vdc: 18 - 36 Vdc
- 48 Vdc: 36 - 72 Vdc
- Dual Output Voltage:
- 12 Vdc: 9 - 18 Vdc
- 24 Vdc: 18 - 36 Vdc
- 48 Vdc: 36 - 72 Vdc
- Single Output Voltage
- Input Filter: Pi Network
OUTPUT
- Voltage Accuracy: ±2.0% max.
- Line Regulation:
- Single Output: ±0.5%, max.
- Dual Output: ±1.0%, max.
- Load Regulation:
- Single Output: ±0.5%, max.
- Dual Output: ±1.0%, max.
- Ripple Noise (20 MHz BW): 1.0% p-p max.
- Temperature Coefficient at FL: ±0.02%/°C max.
- Transient Response, 25% load step: <250 ms
REMOTE ON/OFF CONTROL
- Control Voltage Reference to Negative (-) Input
- Compatibility: CMOS, TTL
- On Control: 4.8V min. or Open
- Off Control: 0.4V max. or Short
GENERAL
- Efficiency: 80 - 85% max.
- Isolation Voltage: 1600 Vdc min.
- Isolation Resistance: 1000 MOhms
- Switching Frequency: 200 KHz typ.
- Protection
- Over Current Protection
- Continuous Short Circuit Protection
ENVIRONMENTAL
- Operating Temperature Range: -25 to 71°C
- Storage Temperature Range: -55 to 125°C
- Cooling: Free Air Convection
- EMI/RFI: Six-Sided Continuous Shield
PHYSICAL
- Case Material: Nickel-coated copper with non-conductive base
- Dimensions: 3.94" x 2.76" x 0.75" (100.076 x 70.104 x 19.05mm)
| Input Voltage Range (Vdc) | Output Voltage (Vdc) | Output Current (mA) | Efficiency % | Model Number | Case |
|---|---|---|---|---|---|
| Single Output | |||||
| 12 (9-18) | 3.3 | 15000 | 78 | MWA60-12S33 | R |
| 5 | 12000 | 81 | MWA60-12S5 | R | |
| 12 | 5000 | 82 | MWA60-12S12 | R | |
| 15 | 4000 | 82 | MWA60-12S15 | R | |
| 24 (18-36) | 3.3 | 15000 | 79 | MWA60-24S33 | R |
| 5 | 12000 | 83 | MWA60-24S5 | R | |
| 12 | 5000 | 84 | MWA60-24S12 | R | |
| 15 | 4000 | 84 | MWA60-24S15 | R | |
| 48 (36-72) | 3.3 | 15000 | 80 | MWA60-48S33 | R |
| 5 | 12000 | 84 | MWA60-48S5 | R | |
| 12 | 5000 | 85 | MWA60-48S12 | R | |
| 15 | 4000 | 85 | MWA60-48S15 | R | |
| Dual Output | |||||
| 12 (9-18) | ±5 | +10000 / -2000 | 81 | MWA60-12-5 | R |
| ±12 | ±2500 | 82 | MWA60-12-12 | R | |
| ±15 | ±2000 | 82 | MWA60-12-15 | R | |
| 3.3 / 5.0- | 600 / 600- | 79 | MWA60-12D33/5 | R | |
| 24 (18-36) | ±5 | +10000 / -2000 | 83 | MWA60-24-5 | R |
| ±12 | ±2500 | 84 | MWA60-24-12 | R | |
| ±15 | ±2000 | 84 | MWA60-24-15 | R | |
| 3.3 / 5.0- | 600 / 600- | 80 | MWA60-24D33/5 | R | |
| 48 (36-72) | ±5 | +10000 / -2000 | 84 | MWA60-48-5 | R |
| ±12 | ±2500 | 85 | MWA60-48-12 | R | |
| ±15 | ±2000 | 85 | MWA60-48-15 | R | |
| 3.3 / 5.0- | 600 / 600- | 81 | MWA60-48D33/5 | R | |
Notes
For 4:1 Input Voltage, use prefix “MWB60” in place of “MWA60” in model number.
For 9-36Vdc Input, use “24” after “-60”.
For 20-72Vdc Input, use “48” after “-60”.