10 Watt
Single and Dual Output
Low Profile Regulated, 4:1 Wide Input
High efficiency with an extra small low profile package
With no minimum load required and a high efficiency up to 92%, our 10 watt single and dual output LPB10 series DC-DC converter meets all UL60950-1, EN60950-1 and IEC60950-1 safety standards. Additionally, it features a six-sided continuous shield and an extra small low profile package of 1" x 1" x 0.39".
INPUT
- Voltage range
- Voltage Range
- 24 Vdc nominal input: 9 to 26 Vdc
- 48 Vdc nominal input: 18 to 75 Vdc
- Start up voltage
- 24 Vdc nominal input: 9 Vdc
- 48 Vdc nominal input: 18 Vdc
- Shutdown voltage
- 24 Vdc nominal input: 8 Vdc
- 48 Vdc nominal input: 16 Vdc
- Start up time
- Remote on/off and power up: 30 mS
- Constant resistive load
- Input surge voltage
- 24 Vdc nominal input: 50 Vdc
- 48 Vdc nominal input: 100 Vdc
- Input reflected ripple current
- Nominal input and full load: 30 mAp-p
- Remote ON/OFF
- Positive logic
- DC-DC ON: Open or 3 to 15 Vdc
- DC-DC OFF: Short or 0 to 1.2 Vdc
- Negative logic
- DC-DC ON: Short or 0 to 1.2 Vdc
- DC-DC OFF: Open or 3 to 15 Vdc
- Positive logic
- Input current of control pin: -0.5 to 1 mA
- Remote off input current: 2.5 mA
- Voltage Range
OUTPUT
- Output power
- Output voltage trimmed up 10%: 11 W
- Output voltage trimmed up 20%: 12 W
- Voltage accuracy: ±1%
- Line regulation
- No load to full load
- Single: ±0.2%
- Dual: ±0.5%
- 10% to 90% load
- Single: ±0.1%
- Dual: ±0.8%
- No load to full load
- Cross regulation
- Asymmetrical load 25/100% FL, dual: ±5%
- Voltage and adjustability
- Single output, 3.3 Vout, 12 Vout: ±10%
- Others: -10 to 20%
- Ripple and noise (measured by 20 MHz bandwidth)
- With a 10µF/25V X7R 1206 MLCC, 3.3 and 5 Vout:
- 40 mVp-p
- With a 10µF/25V X7R 1206 MLCC, 12 and 15 Vout:
- 60 mVp-p
- With a 1µF/25V X7R 1206 MLCC, 24 Vout
- With a 10µF/25V X7R 1206 MLCC, 3.3 and 5 Vout:
- Temperature coefficient: ±0.2%/°C
- Transient response recovery time: 250µs
- Over voltage protection
- 3.3 Vdc output: 3.7 to 5.4 Vdc
- 5 Vdc output: 6.3 to 7.4 Vdc
- 12 Vdc output: 13.5 to 19.6 Vdc
- 15 Vdc output: 18.3 to 22 Vdc
- 24 Vdc output: 29.1 to 32.5 Vdc
- Over load protection: 150%
- Short circuit protection: Continuous, automatics recovery
GENERAL
- Efficiency: 85 to 91%
- Isolation voltage
- Input to Output: 1600 Vdc, min. 1 minute
- Input to Case: 1000 Vdc, min. 1 minute
- Isolation resistance: 500 Vdc
- Isolation capacitance: 1500 pF
- Switching frequency: 297 to 363 kHz
ENVIRONMENTAL
- Operating ambient temperature
- Without derating: -40 to 81°C
- With derating: 81 to 105°C
- Maximum case temperature: 105°C
- Storage temperature range: -55 to 125°C
- Thermal impedance
- Without heat sink: 16.18°C/W
- With heat sink: 15.13°C/W
- Thermal shock: MIL-STD-810F
- Vibration: MIL-STD-810F
- Relative humidity: 5 to 95%
| Input Voltage Range (Vdc) | Output Voltage (Vdc) | Output Current Full Load (A) | Input Current No load (mA) | Efficiency (%) | Model Number | Max. Capacitor Load µF |
|---|---|---|---|---|---|---|
| Single Output | ||||||
| 9 - 36 | 3.3 | 3000 | 6 | 85 | LPB10-24S33 | 3500 |
| 5 | 2000 | 6 | 87 | LPB10-24S5 | 2500 | |
| 12 | 830 | 6 | 90 | LPB10-24S12 | 430 | |
| 15 | 670 | 6 | 91 | LPB10-24S15 | 350 | |
| 24 | 416 | 6 | 90 | LPB10-24S24 | 125 | |
| 18 - 75 | 3.3 | 3000 | 4 | 85 | LPB10-48S33 | 3500 |
| 5 | 2000 | 4 | 87 | LPB10-48S5 | 2500 | |
| 12 | 830 | 4 | 90 | LPB10-48S12 | 430 | |
| 15 | 670 | 4 | 90 | LPB10-48S15 | 350 | |
| 24 | 416 | 4 | 90 | LPB10-48S24 | 125 | |
| Dual Output | ||||||
| 9 - 36 | ±5 | ±1000 | 6 | 87 | LPB10-24-5 | ±1440 |
| ±12 | ±416 | 6 | 89 | LPB10-24-12 | ±250 | |
| ±15 | ±333 | 6 | 89 | LPB10-24-15 | ±180 | |
| 18 - 75 | ±5 | ±1000 | 4 | 87 | LPB10-48-5 | ±1440 |
| ±12 | ±416 | 4 | 89 | LPB10-48-12 | ±250 | |
| ±15 | ±333 | 4 | 89 | LPB10-48-15 | ±180 | |